Hochiki TCH-B100 User Manual download pdf

2-3-0-237/ISS5/AUG09

HOCHIKI TCH-B100 – ESP DEVICE PROGRAMMER

OPERATING INSTRUCTIONS

General Description

The TCH-B100 ESP Programmer is designed for use with the following products:

ALG-E / ALG-EN

Analogue Photoelectric Sensors

CHQ-BS

Base Sounder

AIE-E

Analogue Ionisation Sensor

CHQ-WS

Wall Sounder

ATG-E

Analogue Heat Sensor

CHQ-WS2

Wall Sounder

ACB-E

/ ACB-EW

Analogue Multi-Heat Sensors

CHQ-WSB

Wall Sounder Beacon

ACA-E

Analogue Multi-Sensor

YBO-BS

Base Sounder

ALK-E

Analogue Photoelectric Sensor

YBO-BSB

Base Sounder Beacon

HCP Range

Analogue Manual Call Points

CHQ-AB

Analogue Beacon

CHQ-POM

Powered Output Module

CHQ-SIM

Single Input Module

CHQ-ARI

Analogue Remote Indicator

C = device clips straight onto Programmer, 2 = in conjunction with PL-2 Programming Lead, 3 = in conjunction with PL-3 Programming Lead

The programmer is used to set the address of the above products for use with Hochiki ESP systems. The unit

is designed to be light, robust and easy to use and operates from a single PP3 size, heavy-duty battery which

gives the capacity for up to 8,000 operations.

Keys

The TCH-B100 has 3 operating keys, a middle red key and lower left and right grey keys, these keys have the

following functions.

 Left (grey key) key - Power On - automatically reads the address of the fitted sensor - subsequent

operations of this key will advance the programmer address in units of 10.

 Right (grey key) key - Advances the programmer address display in units of 1. Also used as the Power Off

button.

 Middle (red key) key - Stores the displayed address to the Sensor and is used to read the Sensor’s

analogue levels.

Operation - Address Setting

 Locate the Device onto the programmer ensuring the 3 locating pips line up with the grooves in the

programmer.

 Press the left (grey) key to switch the programmer on, a battery check message will be displayed followed

by the address of the device fitted (previously un-programmed devices will read 127).

 Select the required address by incrementing the programmer display (left grey key, 10’s, right grey key,

units). Whilst the display is showing an address different to that stored in the device, 3 dots will also flash.

 Once the wanted address is displayed press the upper (red) key to store the address in the device. Once

the address is correctly stored the 3 dots will cease to flash and the display will show the address set.

 To program a CHQ-BS a PL-2 Programming Lead must be used, firstly connect the plug into the remote

programming socket on the TCH-B100 and then connect the black croc clip to the C terminal, and the red

1 2 3 4

Summary of Contents

Page 1 - OPERATING INSTRUCTIONS

2-3-0-237/ISS5/AUG09 HOCHIKI TCH-B100 – ESP DEVICE PROGRAMMER OPERATING INSTRUCTIONS General Description The TCH-B100 ESP Programmer is designed fo

Page 2

2-3-0-237/ISS5/AUG09 croc clip to the L terminal on the base sounder. The address can now be programmed as described above.  To program a CHQ-SIM,

Page 3 - ESP-PROGRAMMIERER

2-3-0-237/ISS5/AUG09 HOCHIKI TCH-B100 – BETRIEBSANLEITUNG FÜR DEN ESP-PROGRAMMIERER Allgemeine Beschreibung Der TCH-B100 ESP-Programmierer ist für

Page 4 - PL-3 Programmierkabel

2-3-0-237/ISS5/AUG09 Die Anzeige zeigt die eingegebene Adresse.  Zum Programmieren eines CHQ-BS muss das mitgelieferte PL-2-Programmierkabel verwen

Comments to this Manuals

No comments

Hochiki TCH-B100 User Manual

Browse online or download User Manual for Audio Hochiki TCH-B100. Hochiki TCH-B100 Benutzerhandbuch

Summary of Contents

Comments to this Manuals

Related products and manuals for Audio Hochiki TCH-B100